Modulated DSC of a Polypropylene Battery Separator
Modulated DSC (MDSC) was performed on a polypropylene (PP) battery separator to gain additional insights into the effects of stretching during processing of the film.
Modulated Thermomechanical Analysis (MTMA) of Polypropylene Battery Separator Film
Modulated thermomechanical analysis (MTMA) was performed on a polypropylene (PP) battery separator to gain further insight into the mechanism of the dimension change and coefficient of linear expansion (CLE or α).
Powder Rheology of Graphite: Characterization of Natural and Synthetic Graphite for Battery Anode Slurries
The TA Instruments Powder Rheology Accessory was used with Discovery HR 30 rheometer to perform shear measurements. Duplicate measurements were performed with fresh samples under ambient conditions.
Rheological and Thermogravimetric Characterization on Battery Electrode Slurry to Optimize Manufacturing Process
In this application note, a TA Discovery HR rotational rheometer facilitates coating optimization by measuring slurry viscosity over different shear rates that relate to coating speed. Drying kinetics are investigated with a Discovery TGA to yield the most cost-efficient condition.
In-Plane Measurement of Thermal Diffusivity of Graphite Thin Film
This paper describes in detail the relevant theory and experimental design of measuring the in-plane thermal diffusivity of high thermal conductivity graphite thin film samples with TA Instruments’ flash diffusivity analyzer DXF 200.
In-Plane Measurement of Thermal Diffusivity of Copper Thin Film
This paper describes in detail the relevant theory and experimental design of measuring the in-plane thermal diffusivity of high thermal conductivity copper thin film samples with a flash diffusivity analyzer.
The Impact of Electrolyte Additives in Lithium-ion Batteries Determined Using Isothermal Microcalorimetry
In this study, a high resolution TAM microcalorimeter equipped with 12 microcalorimeters was used to measure and quantitatively compare the heat flow of lithium-ion batteries that only vary in concentration of electrolyte additive.
An Overview of Isothermal Microcalorimetry in Battery R&D and QA
An overview of isothermal microcalorimetry in battery research, development and quality control in order to illustrate the versatility and providing an idea of the possibilities of isothermal microcalorimetry.
Rheological Evaluation of Battery Slurries with Different Graphite Particle Size and Shape
This application note discusses how to use rheology to evaluate the influence of graphite particle size and particle shape on the rheological behavior of a battery slurry.
Battery Separator Film Development: Impact of Coating
This note applies the workflow outlined in TA457 [3] to characterize coated and uncoated separators. In addition to TMA, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dynamic mechanical analysis (DMA) will be utilized.
ITC Batch Analysis in NanoAnalyze
Overview In this Tech Tip, we will demonstrate the ITC Batch Analysis in NanoAnalyze.
Advanced Peltier Plate
Advanced Peltier Plate Combines ultimate flexibility with exceptional temperature performance in a single Peltier Plate temperature system designed to cover the widest range of applications. Description Features Technology Accessories Advanced Peltier Plates The Advanced Peltier Plates (APP) combine ultimate flexibility with exceptional temperature performance in a single Peltier Plate temperature system designed to cover the…