TA Instruments Powder Rheology Accessory for Temperature Control is used to study a filled epoxy resin for powder coatings. The results show that care must be taken in storage and processing, even at temperatures below the glass transition due to the effects on flowability and cohesion.
In this note, a lithium nickel manganese cobalt (NMC) cathode and graphite anode are evaluated, finding higher reaction energy in the cathode, and increasing thermal stability with decreasing state-of-charge.
Thermogravimetric Analysis (TGA), which provides information about the thermal stability and decomposition rate of materials, is an excellent technique for rapidly comparing the behavior of materials tested with different flame retardants.
The Battery Cycler Microcalorimeter solution is an end-to-end, in-operando measurement tool for elucidating the thermodynamic and electrochemical details of battery cells in real time, in a flexible and intuitive system.
Thermogravimetric Analysis (TGA), which provides information about the thermal stability and decomposition rate of materials, is an excellent technique for rapidly comparing the behavior of materials tested with different flame retardants.
The Battery Cycler Microcalorimeter is an end-to-end measurement tool for elucidating the thermodynamic and electrochemical details of battery cells.
A lignite coal sample and several petroleum coke samples have been gasified in the new Discovery HP-TGA 75 and 7500 instruments using carbon dioxide and steam as gasifying agents. The evolved gas atmosphere was analyzed with online mass spectrometry to detect the generated syngas components.
Evaluation of the single beam and 100% line is important in any FTIR analysis and especially in TGA/FTIR.
To assess how alternative materials perform as compared to traditional plastic materials, dynamic mechanical analysis (DMA) may be used in addition to previously reported tensile, compressive, and hardness methods.
TA Instruments’ High-Pressure TGA (HP-TGA) enables users to investigate stability and lifetime of polymers under realistic working conditions, assessing not only the effect of temperature on material stability, but also the effects of high pressure and possibly corrosive atmospheres.
The purpose for this note is to detail the basic thermal analysis and mechanical techniques used to characterize a typical separator made from PP.
Overview In this Tech Tip, we will set up cell constant and temperature calibration on the Discovery DSC and prepare an indium sample for the calibration.