Using RapidDSC Analysis Features in NanoAnalyze
Overview In this Tech Tip, we will demonstrate how to use the RapidDSC analysis features in NanoAnalyze to rapidly analyze DSC data with automatic peak picking and baseline detection.
Loading the RS-DSC and Starting an Experiment
Overview In this Tech Tip, we will demonstrate how to load the TA Instruments Rapid Screening Differential Scanning Calorimeter (RS-DSC), program a method, and start an experiment.
Microfluidic Sample Chip Preparation for the RS-DSC
Overview In this Tech Tip, we will demonstrate how to prepare the disposable microfluidic sample chips for use in the TA Instruments Rapid Screening Differential Scanning Calorimeter (RS-DSC).
Installing and Calibrating the Rheo-Impedance Spectroscopy Accessory for HR Rheometers
Overview In this Tech Tip, we will install and calibrate the TA Instruments Rheo-Impedance Spectroscopy Accessory for HR Rheometers.
Bestimmung der Wärmekapazität mittels Discovery DSC: Die klassischer Methode mit drei Experimenten
Overview In this Tech Tip, we will discuss measuring heat capacity using DSC with the ASTM 3-run method.
Unlocking Data Accessibility with TRIOS JSON Export
Overview We’re excited to introduce a brand-new feature in TRIOS called TRIOS JSON (JavaScript Object Notation) Export. Whether you’re deep into data science, streamlining automation, or simply seeking better ways to archive your results, JSON Export will transform the way you use your TRIOS data. Download the TRIOS JSON Schema: https://software.tainstruments.com/schemas/TRIOSJSONExportSchema Check out our Python…
TRIOS EasyMass: Unlocking Efficient Experiment Preparation with Automatic Mass Data Transfer
Overview Learn how to use the new TRIOS EasyMass feature for the TA Instruments Discovery DSC (Differential Scanning Calorimeter), which allows you to automatically send mass data from your balance directly to TRIOS. The balance is connected directly to a computer by a USB cable, and on-screen instructions guide users through the sample weighing process.…
How to Run an LED-PCA Experiment on the Discovery DSC
Overview TA Instruments – Waters Corporation’s state-of-the-art LED Photocalorimeter Accessory (LED-PCA) allows for the comprehensive study and characterization of photocurable materials across a broad temperature spectrum.
Installing the LED Photocalorimeter Accessory for the Discovery DSC
Overview In this Tech Tip, we will install the new Photocalorimeter Accessory (LED-PCA) on the Discovery DSC.
Adding Calibration Standards to TRIOS Software
Overview In this Tech Tip, we will show you how to add a calibration standard to TRIOS software. Calibrations are obtained by comparing the literature values of known standards to the measured ones in the calibration experiment. Standards’ melting, curie, Cp, and CTE values are used for different calibrations on thermal instruments. Here we will…
How to Correct Heat Flow for Large Ambient Temperature Fluctuations – Part 2
Overview In this Tech Tip, we will demonstrate how to calculate the filter time constant and heat flow dependency factor, which are needed to optimize baseline performance when large ambient temperature fluctuations are present.
How to Correct Heat Flow for Large Ambient Temperature Fluctuations – Part 1
Overview In this Tech Tip, we will demonstrate how to set up the TAM IV to optimize baseline performance when large ambient temperature fluctuations are present.