Running Experiments with RheoGuide™ and a Concentric Cylinder on the Discovery Core Rheometer
Overview In this Tech Tip, we’ll be discussing how to use RheoGuide software™ to run experiments on the Discovery Core Rheometer.
Using the New TRIOS RheoGuide™ Method Builder
Overview In this Tech Tip, we’ll be discussing how to create RheoGuide™ methods using TRIOS software for the Discovery Core Rheometer.
Installing and Calibrating the Rheo-Impedance Spectroscopy Accessory for HR Rheometers
Overview In this Tech Tip, we will install and calibrate the TA Instruments Rheo-Impedance Spectroscopy Accessory for HR Rheometers.
Setting Up a Compressibility Test Using the Powder Rheology Accessory on the DHR
Overview In this Tech Tip, we will show you how to set up a Compressibility Test using the Powder Rheology accessory on the DHR.
Setting Up the Powder Flow Cell with Temperature Control on the DHR
Overview In this Tech Tip, we will show you how to set up the Powder Flow Cell with temperature control on the DHR.
Setting Up the Powder Shear Cell with Temperature Control on the DHR
Overview In this Tech Tip, we will show you how to setup up the powder shear cell with temperature control on the DHR.
How to Set Up the Auto-Trim Accessory for the Discovery Hybrid Rheometer
Overview In this Tech Tip, we will show you how to set up the Auto-Trim Accessory for the Discovery Hybrid Rheometer.
Powder Flow Measurement on the Discovery Hybrid Rheometer
Overview In this Tech Tip, we will set up the TA Instruments powder rheology flow cell.
DHR Solid Polymer Torsional Analysis – TRIOS Polymer Guided Methods
Overview In this Tech Tip, we introduce the new DHR Polymer Torsional TRIOS Guided Method.
DHR Polymer Melt Analysis – TRIOS Polymer Guided Methods
Overview In this Tech Tip, we introduce the new DHR Polymer Melt TRIOS Guided Method.
Selecting Between Parallel Plate and Cone Geometries
Overview In this Tech Tip, we will demonstrate how to select between parallel plate and cone geometries. Learn more about TA rheology accessories here
Selecting a Concentric Cylinder Geometry for the Discovery Hybrid Rheometer
Overview The Discovery Hybrid Rheometer offers an array of concentric cylinder geometries to choose from. Concentric cylinder geometries are made up of two parts, the rotor and cup, also called the cup and bob. With numerous rotors and cups to choose from, how do you find the right combination for your lab? This tech tip…