Effect of Thermal Degradation on Polymer Thermal Properties
In this Applications note, we demonstrate using TGA to precisely control the degree of degradation to be < 5wt% and characterize the impact of degrees of degradation on polymer thermal properties.
DetailsEffect of Moisture on Cohesion Strength of Carboxymethyl Cellulose Powder
The impact of moisture content on cohesion strength is measured using the TA Instruments Powder Rheology Accessory. It was found that as moisture content increases, cohesion strength also increases, demonstrating the importance of controlling humidity during processing.
DetailsEffect of Moisture and Substrate Material on Wall Friction Angle of Carboxymethyl Cellulose Powder
This work investigates the influence of moisture content and substrate material on the wall friction of carboxymethyl cellulose powder, which is used as an excipient in tablet formulations.
DetailsDynTHERM – High Pressure TGA
DynTHERM The DynTHERM TGA is an advanced gravimetric instrument for high temperature and high pressure thermogravimetric analysis.
DetailsDynamic Mechanical Testing of Environmentally Friendly Drinking Straws
To assess how alternative materials perform as compared to traditional plastic materials, dynamic mechanical analysis (DMA) may be used in addition to previously reported tensile, compressive, and hardness methods.
DetailsDynamic Mechanical Analysis Training
Applications Training: Dynamic Mechanical Analysis The lecture-based course covers theory applicable to all Dynamic Mechanical Analysis (DMA) instruments (including previous generation instrument models), but is mainly designed around the DMA 850 and RSA G2. The course will cover: Theory of operation Instrumentation Calibration Experimental Parameters Software operation Maintenance & Troubleshooting Applications Need help? If you are having…
DetailsDynamic Mechanical Analysis (DMA)
Dynamic Mechanical Analysis (DMA) True axial DMA capability in bending, tension, and compression. Description Features Applications Axial Bending, Tension and Compression With its unique Force Rebalance Transducer (FRT), the ARES-G2 rheometer is the only rotational rheometer capable of performing linear Dynamic Mechanical Analysis (DMA) on solids in bending, tension and compression. Axial sample deformation is…
DetailsDynamic Mechanical Analysis – Materials to Final Products
From plastic for medical devices to rubber for tires, the materials we use must meet increasingly high demands. Product manufacturers and consumers expect their materials to look good, perform well, and cost less, all while being environmentally friendly. Fulfilling all these expectations requires deep understanding of material behavior from the molecular level to real world mechanical properties. Since there are many factors that affect the properties of materials, precise measurement tools and methods are required to ensure that materials fulfill the high expectations of our world. A key measurement and analysis method to evaluate the properties of materials at various stages of development and production is Dynamic Mechanical Analysis (DMA).
DetailsDynamic Mechanical Analysis
Dynamic Mechanical Analysis (DMA) The DMA Mode adds a new dimension for testing of solid and soft-solid materials. Description Technology Specifications & Features Applications Dynamic Mechanical Analysis (DMA) Backed by over four decades of TA Instruments’ expertise in rotational rheology and linear DMA measurements, the Discovery Hybrid Rheometer’s DMA Mode adds a new dimension for…
Details