MV one
Mooney Viscometer
Mooney Viscometer incorporates the latest measurement technology for the traditional Mooney viscosity, Mooney scorch, and stress relaxation measurement in the rubber industry.
The MV one Mooney Viscometer incorporates the latest measurement technology for the traditional Mooney viscosity, Mooney scorch, and stress relaxation measurement in the rubber industry. The MV one is a fully featured instrument configured for standard viscosity, scorch and stress relaxation (linear, logarithmic, ISO, Mooney Stress-relaxation Rate) testing of rubber compounds under isothermal test conditions at constant speed of 2 rpm. Every TA Mooney also comes standard with the variable rate motor mode, which is used to obtain additional sample and processing information by testing at any rotational rate between 0.1 and 10 rpm. The MV one Mooney Viscometer is equipped with low mass rotors that meet all relevant ASTM, ISO, and DIN standards. All TA Instruments rubber testing instruments are constructed on ultra-rigid test frames and include direct drive motors, precision temperature control and the powerful and intuitive Scarabaeus Control and Analysis Software.
Features
- Superior design for unmatched data precision and accuracy
- Extremely rigid test frame for accurate compliance-free data
- Low mass rotor design and direct heating for fast and accurate temperature control
- High resolution variable speed direct drive motor
- Automated internal torque calibration
- Long-life user-replaceable seals
- Powerful and Intuitive Scarabaeus Software available in multiple languages
- Large (38.10 mm) and small (30.48 mm) diameter rotors
- Mooney viscosity, stress relaxation, scorch measurements
| Rotational Speed | 2 rpm (Standard)
0.1 to 10 rpm (included Variable Rate mode) |
| Temperature Range | Ambient to 200°C |
| Torque Range | 0.01 to 200 MU |
| Rotors | Large: 38.10 mm D
Small: 30.48 mm D |
| Test Modes | Mooney Viscosity Mooney Scorch Stress Relaxation (Linear, Logarithmic, ISO, Mooney Stress-relaxation Rate) |
| Standards | ASTM D1646, ISO 289, DIN 53523, BS 903-A58 |
TA Instruments is the world’s leading supplier of analytical instrumentation for the measurement of viscosity and viscoelastic properties. The new rubber testing instruments are uniquely designed to deliver the highest quality of torque, amplitude, frequency, temperature, and pressure measurement and control setting the NEW STANDARD for testing of rubber products at all stages of manufacturing.
Mooney Viscometer Rotors
Mooney Viscometer Rotors
The MV one Mooney Viscometer is compatible with rotors of both large (38.1 mm) and small (30.48 mm) diameters. Both rotors are endorsed by international standards and can be selected for measurement of low or high viscosity rubbers or polymers. Both rotor types can be used in conjunction with polyester or polyamide films to simplify instrument cleaning and reduce time between runs. Rotors are designed with low mass to optimize thermal response and transient speed changes at the beginning and end of shearing steps.
Torque Calibration
Torque Calibration
Calibration is software driven and does not require the use of external weights, fixtures, or reference materials. A weight of known mass is connected by a well-defined radius, creating a constant torque value. The software driven torque calibration routine uses this internal standard to ensure utmost data accuracy.
- Description
-
The MV one Mooney Viscometer incorporates the latest measurement technology for the traditional Mooney viscosity, Mooney scorch, and stress relaxation measurement in the rubber industry. The MV one is a fully featured instrument configured for standard viscosity, scorch and stress relaxation (linear, logarithmic, ISO, Mooney Stress-relaxation Rate) testing of rubber compounds under isothermal test conditions at constant speed of 2 rpm. Every TA Mooney also comes standard with the variable rate motor mode, which is used to obtain additional sample and processing information by testing at any rotational rate between 0.1 and 10 rpm. The MV one Mooney Viscometer is equipped with low mass rotors that meet all relevant ASTM, ISO, and DIN standards. All TA Instruments rubber testing instruments are constructed on ultra-rigid test frames and include direct drive motors, precision temperature control and the powerful and intuitive Scarabaeus Control and Analysis Software.
Features
- Superior design for unmatched data precision and accuracy
- Extremely rigid test frame for accurate compliance-free data
- Low mass rotor design and direct heating for fast and accurate temperature control
- High resolution variable speed direct drive motor
- Automated internal torque calibration
- Long-life user-replaceable seals
- Powerful and Intuitive Scarabaeus Software available in multiple languages
- Large (38.10 mm) and small (30.48 mm) diameter rotors
- Mooney viscosity, stress relaxation, scorch measurements
- Specifications
-
Rotational Speed 2 rpm (Standard) 0.1 to 10 rpm (included Variable Rate mode)
Temperature Range Ambient to 200°C Torque Range 0.01 to 200 MU Rotors Large: 38.10 mm D Small: 30.48 mm D
Test Modes Mooney Viscosity
Mooney Scorch
Stress Relaxation (Linear, Logarithmic, ISO, Mooney Stress-relaxation Rate)Standards ASTM D1646, ISO 289, DIN 53523, BS 903-A58 - Technology
-
TA Instruments is the world’s leading supplier of analytical instrumentation for the measurement of viscosity and viscoelastic properties. The new rubber testing instruments are uniquely designed to deliver the highest quality of torque, amplitude, frequency, temperature, and pressure measurement and control setting the NEW STANDARD for testing of rubber products at all stages of manufacturing.
Mooney Viscometer Rotors
Mooney Viscometer Rotors
The MV one Mooney Viscometer is compatible with rotors of both large (38.1 mm) and small (30.48 mm) diameters. Both rotors are endorsed by international standards and can be selected for measurement of low or high viscosity rubbers or polymers. Both rotor types can be used in conjunction with polyester or polyamide films to simplify instrument cleaning and reduce time between runs. Rotors are designed with low mass to optimize thermal response and transient speed changes at the beginning and end of shearing steps.
Torque Calibration
Torque Calibration
Calibration is software driven and does not require the use of external weights, fixtures, or reference materials. A weight of known mass is connected by a well-defined radius, creating a constant torque value. The software driven torque calibration routine uses this internal standard to ensure utmost data accuracy.